How to set Auto Power on upon powering up via BIOS setting?

From 6th Gen processor to 10th Gen CPU based Fanless mini PC, the BIOS setting for auto power on upon powering up is the same, steps are as below:

Setp 1: Press On/Off Switch on the PC and keep pressing “Delete” until enter into bios, then use direction key to go to “Chipset”, after that select “PCH_IO configuration”, then press “Enter” Key and go to step 2

Step 2: Find “State After G3” under “PCH_IO configuration” page, change “s5 state” to “s0 state”, then press “Enter” key.

Step3: Press “F10” key to save the setting and finish the setting.

Leave a Reply

Close Menu